Experimental investigation of impact-sliding interaction and fretting wear between tubes and anti-vibration bars in steam generators

Experimental investigation of impact-sliding interaction and fretting wear between tubes and anti-vibration bars in steam generators

Blog Article

The tubes in a heat exchanger, such as a steam generator (SG), are subjected to crossflow, and interaction between tubes and supports can happen, which can cause fretting wear of tubes.Although many experiments and models have been established, some detailed mechanisms are still not sufficiently clear.In this work, more attention is paid to obtain the regulation of impact and sliding in the click here complex process and many factors, such as excitation forces and clearances.

The responses and contact forces were analyzed to obtain clear understanding of the influences of these factors.Room temperature tests in the air were established.The results show nightstick twm-850xl that the effect of clearance on the normal work rate is not monotonous and instead has two peaks.

The force ratio can influence the normal work rate by changing the distribution of contact angles, which can result in higher sliding in the contact process.Fretting wear tests are conducted, and the wear surfaces are analyzed by a scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDX).The results of this work can serve as a reference for impact-sliding contact analysis between AVBs and tubes in steam generators.